LaserLiner MoistureMaster Compact Manuel D'utilisation page 20

12
Wet/dry LED indicator
In addition to numeric measurement display in % of relative material moisture,
the LED display also provides a material-dependent evaluation of moisture.
The LED display bar becomes larger, from left to right, with increasing moisture
content. The 12-position LED display is subdivided into 4 green (dry), 3 yellow
(moist) and 5 red (wet) segments. Wet material causes an additional acoustic
signal.
Green = dry
The classification "dry" means that materials in a heated room have
!
reached a balanced moisture level and are thus suitable for further
processing.
13
Application notices
Place the device such that the sensor
pads fully rest on the material to be
measured and exert a pressure of
about 2.5 kg onto the surface to be
measured.
TIP: Use scales to test the contact
pressure.
20
EN
Yellow = moist
Always hold and press down the
measuring device in the same way
(see illustration).
Red = wet