Adjusting The Screen Size (Aspect) - JVC DLA-RS4810 Instructions

Adjusting the Screen Size (Aspect)

The screen size of the projected image can be adjusted
optimally according to the original screen size (aspect)
that has been input.
Press the [MENU] button to display
1
the menu
Select "Input Signal"""Aspect
2 (Video)" or "Aspect (PC)" from the
menu
.
Input Signal Setting
Aspect 4:3
(Video)
16:9
Zoom
Aspect (PC) Auto
Just
Full
During 3D signal input, the size is fixed at "16:9"
0
.
Press the [MENU] button to exit
3
Input Signal
HDMI
COMP.
PC
Picture Position
Aspect (Video) 16:9
Mask Off
Progressive Auto
3D Setting
Operate
Exit Back
MENU Select BACK
Description
Sets the screen size to 4:3. For
HD signals, the two sides are
reduced.
Sets the screen size to 16:9.
For SD signals, the two sides
are expanded.
Enlarges the entire image.
* N ot selectable in the
case of HD signals.
Positions the image at the
center with the entire image
enlarged.
Displays the input image in the
actual size.
Fills the entire screen with the
image with the size (aspect) of
the input image ignored.
Example of input image and screen size
HDMI input, component video input
Output Image
Input Image
4:3
2.35:1
(Cinema
Scope)
PC Input
Output Image
Input Image
1280×1024
1920×1200
.
Setting
4:3 16:9 Zoom
.
Setting
Auto Just Full
33