Thread Tapping and Mixing
The forward/reverse action enables the tool to be
used for thread tapping and mixing.
● Install the side handle.
● Select the required direction of rotation.
● Proceed as described above.
WARNING:
●
Do not use this tool to mix or pump easily
combustible or explosive fl uids
(benzine, alcohol, etc.).
● Do not mix or stir infl ammable liquids
labelled accordingly.
MAINTENANCE
Your D
WALT power tool has been designed to
E
operate over a long period of time with a minimum of
maintenance. Continuous satisfactory operation
depends upon proper tool care and regular cleaning.
WARNING: To reduce the risk of injury,
switch off and disconnect the tool from
the power source before installing and
removing accessories, before adjusting
or changing set-ups or when making
repairs. Be sure the tool is switched off.
An accidental start-up can cause injury.
Lubrication
Your power tool requires no additional lubrication.
Cleaning
WARNING: Blow dirt and dust out of the
main housing with dry air as often as dirt
is seen collecting in and around the air
vents. Wear approved eye protection
and approved dust mask when
performing this procedure.
WARNING: Never use solvents or other
harsh chemicals for cleaning the
non-metallic parts of the tool. These
chemicals may weaken the materials
used in these parts. Use a cloth
dampened only with water and mild
soap. Never let any liquid get inside the
tool; never immerse any part of the tool
into a liquid.
Optional Accessories
WARNING: Since accessories, other
than those offered by D
been tested with this product, use of
such accessories with this tool could be
hazardous. To reduce the risk of injury,
only D
WALT, recommended
E
accessories should be used.
Consult your dealer for further information on the
appropriate accessories.
Protecting the Environment
Separate collection. This product must
not be disposed of with normal household
waste.
Should you fi nd one day that your D
needs replacement, or if it is of no further use to you,
do not dispose of it with household waste. Make this
product available for separate collection.
Separate collection of used products and
packaging allows materials to be recycled
and used again. Re-use of recycled
materials helps prevent environmental
pollution and reduces the demand for raw
materials.
Local regulations may provide for separate collection
of electrical products from the household, at municipal
waste sites or by the retailer when you purchase a
new product.
D
WALT provides a facility for the collection and
E
recycling of D
WALT products once they have
E
reached the end of their working life. To take
advantage of this service please return your product
to any authorised repair agent who will collect them
on our behalf.
E N G L I S H
WALT, have not
E
WALT product
E
23