Unpacking And Inspecting The Monitor; Returning The Monitor - ConMed Linvatec VP4726 Manuel D'instruction

1.5 Unpacking and Inspecting the
E
Monitor
Upon receipt, carefully unpack the monitor and
accessories. Ensure contents are complete and
are free from damage. If any damage is noted
contact your ConMed Linvatec
Service Representative. Save ALL packaging
materials; they may be needed to verify any
claims of damage by the shipper.
VP47XX / VP47XXF LCD Monitor:
• 1 - DVI Cable, 6 ft. (IM9021)
• 1 - BNC Cable (8175-06)
• 1 - AC Adapter (VP4726PS for 26"
Monitor or VP4732PS for 32"
Monitor)
• 2 - DC Cable Terminal male / female
(Optional)
• 4 - Screws FH M4x12 (Screws for Vesa
mount - Optional)
• 2 - Ferrite Core,
ZCAT2035-0930A-M-K (Optional)
• 1 - Instruction Manual
The power cord is sold separately and is
packaged in a separate box.
• C7104 Power Cord — 115VAC
• C7105 Power Cord — 230VAC
1.6
If it becomes necessary to return the monitor,
always use the original packaging. The
manufacturer does not take responsibility for
damage that has occurred during transportation
if the damage was caused by inadequate
Customer
transport packaging.
Contact
Return Authorization PRIOR to shipping your
monitor for service.
Please make sure that all required information
has been supplied.
• Owner's Name
• Owner's Address
• Owner's Daytime Telephone Number
• Device type and model.
• Serial Number
• Detailed explanation of the damage.
E-6

Returning the Monitor

ConMed Linvatec Customer Service for