Installation Recommandations - Airelec PARIS DIGITAL Manuel D'utilisation

LED
Heat light
Horizontal

2. INSTALLATION RECOMMANDATIONS

This appliance must be installed in a way that it enables the heater to brew a maximum air volume.
The appliance must be connected in a fixed horizontal position and in compliance with legal
regulations.
Pict. A
It is strictly forbidden to cover or block the shades or air outlets in order to avoid incidents or
deterioration of the appliance. Please avoid installation close to windows or air outlets (chimneys,
ventilation), behind curtains or doors. Please respect the minimum installation distances from the floor,
walls, furniture, etc...
3. INSTALLATION AND WALL MOUNTING
The heater is fixed to the wall with a mounting bracket provided in
the package.
The minimum distances between the heater and the surrounding
elements must be respected for proper operation (diagram cons).
To fix the bracket to the wall proceed as follows:
Remove the bracket snapped-on the heater using
o
1. CHARACTERISTICS
Screen
Temperature setting
REFERENCE RATING TENSION
(W)
A691571
500
A691573 1000
A691575 1500
A691577 2000
Protection volume (Pict. A)
This appliance can be installed in volume 2 or 3,
provided that the power supply is protected by a
residual circuit breaker of not more than 30mA.
To avoid overheating, do not cover the heater in any
circumstances. The
COVER » reminds you about this risk.
Display light : « Programmation » mode
INTENSITY HEIGHT
(V) (A) (mm)
2.2
4.3
230 440
6.5
8.7
IMPORTANT: « DO NOT COVER »
picture
=English Version=
Mode selector button
WIDTH DEPTH
(mm) (mm)
400
480
80+22
640
800
sticker « DO NOT
11