flash, till countdown is over.
Using the Flash
The flash is not only for taking pictures when there is insufficient light, but also
for when the subject is in shade or with backlight conditions. Pressing the
RIGHT/FLASH button cycles your camera through the various flash modes. The
flash will not activate during continuous shooting or movie recording.
1: Set the digital camera to the Capture mode.
2: Press the RIGHT/FLASH button to change the flash mode.
Each time the flash button is pressed, the flash icon changes.
Auto: Automatically turn on/of
Flash on: Force on the flash
Flash off: Force off the flash
3: Press the SHUTTER button to take a picture.
Note:
When the battery power level is low, the flash strobe does not work.
Press the RIGHT/FLASH button, the message shows "Low battery" on the
32