Philips HP6574 Mode D'emploi page 13

Problem
The precision
epilator does not
work.
4203.000.4562.1.indd 13
Cause Solution
The overheat When the epilator stops working and the speed
protection has been setting indications start flashing red, the overheat
activated. protection has been activated. Let the appliance cool
down. The lights stop flashing after 30 seconds. When
the appliance has cooled down, switch on the epilator
again. If the lights start flashing again, the epilator has
not yet cooled down sufficiently.
The overload When the overload protection has been activated,
protection is the speed setting indications flash red. Turn the discs
activated because with your thumb until you can easily remove the
something got caught item that is blocking the rotating discs. Then switch on
between the rotating the appliance again. Do not press the appliance too
discs or because you hard onto your skin.
pressed the
appliance too hard
onto your skin.
The batteries are Replace the batteries or insert them correctly (see
empty or have been 'Inserting the batteries' in chapter 'Using the precision
inserted incorrectly. epilator').
EnglisH
13
03-12-09 16:45