Briteq LDP COBWASH WW Mode D'emploi page 8

ENGLISH
HOW TO SETUP:
For both models all points are identical, except for the display messages: displays are shown on the left side.
 To select any of the functions, press the MODE button until the required function is shown on the display
or use the DOWN and UP buttons to browse the menu.
 Select the function with the ENTER button.
 Use DOWN and UP buttons to change the values.
 Once the required value is selected, press the ENTER button to confirm.
DMX ADDR
Used to set the desired DMX-address.
 Press the MODE button until the desired function is showing on the display.
 Press the ENTER button: the values can be changed
 Use DOWN and UP buttons to select the desired DMX512 address. The last occupied DMX-address is
also shown: makes it easier to set the address of the next unit in the chain.
 Once the correct address shows on the display, press the ENTER button to save it.
Note: on RDM-compatible controllers this option can also be remotely set.
BRITEQ
®
6/50 LDP-COBWASH 50 + 100 (WW/CW)
OPERATION MANUAL