Technical Data; Changing The Battery Pack; Bit Holder - Festool DWC 18-2500 Notice D'utilisation D'origine

3 Intended use
The drywall screwdriver is designed for the follow-
ing works:
DWC 18-2500
– Gypsum fibreboards on metal and wooden con-
structions - Drywall screws with milling ribs
– Chip boards/OSB on wooden constructions bis D
5 mm - Wood construction and chip board screws
up to dia. 5 mm
4

Technical data

Cordless drywall screwdriver
Motor voltage
Idle speed*
Torque (hard / soft)
Chuck
Maximum workable screw length
Weight (without battery pack)
Weight with depth stop (without battery pack)
Weight with magazine attachment (without
battery pack)
* Speed specifications with fully charged battery pack.
5 Machine features
[1-1] Bit store
[1-2] On/Off switch
[1-3] Right/left switch
[1-4] AUTO/MAN switch
[1-5] Depth stop
[1-6] Bit
[1-7] Insulated gripping surfaces (grey shaded
area)
Accessories shown or described are sometimes not
included in the scope of delivery.
The specified illustrations appear at the beginning
of the Operating Instructions.
6 Commissioning
6.1

Changing the battery pack

Inserting the battery pack [2 A]
Removing the battery pack[2 B]
 Battery pack is ready for use immediately upon
delivery and can be charged at any time.
DWC 18-4500
– Gypsum plaster boards on metal profile rails
(≤ 0.88 mm) - Drywall screws with fine thread
– Gypsum plaster boards on metal profile rails
(≤ 2.25 mm) - Drywall screws, self-drilling
– Gypsum plaster boards on wooden constructions
- Drywall screws with coarse thread
The user is liable for improper or non-in-
tended use; this also includes continuous in-
dustrial operation.
DWC18-2500
18 V
-1
0 - 2500 min
7 / 18 Nm
1/4 '' DIN 3126 / ISO 1173
55 mm
7 Settings
Risk of injury

Always switch off the power tool before adjusting
settings!
7.1 Changing direction of rotation [1-3]
• Switch to the left = clockwise rotation
• Switch to the right = counterclockwise rotation
8 Tool holder, attachments
Risk of injury

Always disconnect the battery pack before per-
forming any type of work on the machine!
8.1

Bit holder

The bit holder is used for fast replacement of bits.
DWC18-4500
18 V
0 - 4500 min
5 / 14 Nm
1/4 '' DIN 3126 / ISO 1173
55 mm
1,2 kg
1,3 kg
1,6 kg
CAUTION
WARNING
DWC
GB
-1
13