Intended Use; Technical Data; Parts Of The Device - Festool TPC 18/4 Notice D'utilisation D'origine

– They represent the primary applications of
the power tool.
CAUTION
The emission values may deviate from the
specified values. This is dependent on how
the tool is used and the type of workpiece
being machined.
► The actual load during the entire operating
cycle must be evaluated.
► Depending on the actual load, suitable pro­
tective measures must be defined in order
to protect the operator.
4

Technical data

Cordless impact drill
Motor voltage
No-load speed*
Max. torque
Adjustable torque**
Chuck clamping range
Max. drill diameter
Screwdriving in spruce
Tool holder in drill spindle
Weight as per EPTA Procedure 01:2014 (with auxiliary handle,
BP 18 Li 6.2 AS battery pack and chuck)
Weight incl. Centrotec, excl. auxiliary handle and battery pack.
* Speed values based on fully charged battery pack.
** The maximum speed (value for clockwise rotation) is reduced in the lower torque settings.
5

Parts of the device

[1-1] Buttons for releasing the battery pack
[1-2] Capacity indicator button on battery
pack
[1-3] Capacity indicator
3

Intended use

Cordless impact drill suitable
– for drilling in metal, wood, plastics and
similar materials,
– for impact drilling in brickwork, masonry
and stone,
– for screwing in and tightening screws.
– intended for use with BP Festool battery
packs of the same voltage class.
The user is liable for damage and acci­
dents caused by improper and non-inten­
ded use; this also includes damage and wear
caused by continuous industrial operation.
1. gear
2. gear
3. gear
4. gear
Soft material (wood)
Hard material (metal)
1st gear/2nd gear
Wood
Metal
Masonry (tiles)
Max. ∅
[1-4]
LED light
[1-5] On/off switch
[1-6]
Collar
[1-7] Auxiliary handle
[1-8]
Drilling/impact drilling selector
switch
English
TPC 18/4
18 V
0–500 rpm
0–800 rpm
0–2350 rpm
0–3600 rpm
50 Nm
75 Nm
2–20 Nm
1.5–13 mm
70 mm
13 mm
10 mm
10 mm
1/4 ''
2.6 kg
1.4 kg
17