Emission Levels; Technical Data; Intended Use - Festool DWC 18-2500 Notice D'utilisation

English
Do not use power supply units or third-
–
party battery packs to operate cordless
power tools. Do not use third-party charg­
ers to charge the battery packs. The use of
accessories not expressly authorised by the
manufacturer can result in electric shocks
and/or serious accidents.
2.3

Emission levels

The levels determined in accordance with
EN 62841 are typically:
DWC 18-2500
Sound pressure level
Sound power level
Uncertainty
DWC 18-4500
Sound pressure level
Sound power level
Uncertainty
CAUTION
Noise generated when working
Risk of damage to hearing
► Use ear protection.
Vibration emission level a
three directions) and uncertainty K measured in
accordance with EN 62841:
DWC 18-2500
DWC 18-4500
The specified emission levels (vibration, noise)
– are used to compare machines.
– They are also used for making preliminary
estimates regarding vibration and noise
load during operation.
4

Technical data

Cordless drywall screwdrivers
Motor voltage
No-load speed*
Torque soft/hard
Tool holder
14
L = 67 dB(A)
PA
L = 78 dB(A)
WA
K = 3 dB
L = 72 dB(A)
PA
L = 83 dB(A)
WA
K = 3 dB
(vector sum for
h
a ≤ 2.5 m/s
h
K = 2 m/s
a ≤ 2.5 m/s
h
K = 2 m/s
– They represent the primary applications of
the power tool.
The emission values may deviate from the
specified values. This is dependent on how
the tool is used and the type of workpiece
being machined.
► The actual load during the entire operating
cycle must be evaluated.
► Depending on the actual load, suitable pro­
tective measures must be defined in order
to protect the operator.
3

Intended use

Drywall screwdriver suitable for the following
screwdriving tasks:
DWC 18-2500
– Screwdriving gypsum fibre board to metal
or wooden constructions using drywall
screws with milling ribs
– Screwdriving chipboard/OSB to wooden
constructions with wood screws and chip­
board screws up to a diameter of 5 mm
DWC 18-4500
– Screwdriving plaster boards onto metal
profile bars (≤ 0.88 mm) using drywall
screws with a fine thread
– Screwdriving plaster boards onto metal
profile bars (≤ 2.25 mm) using drywall
screws with a drill point
– Screwdriving plaster boards to wooden
2
constructions using drywall screws with a
coarse thread
2
This power tool is suitable for use with
2
BP Festool battery packs of the same voltage
class.
2
The user is liable for damage and acci­
dents caused by improper and non-inten­
ded use; this also includes damage and wear
caused by continuous industrial operation.
DWC 18-2500
18 V
0–2500 rpm
7/18 Nm
1/4" DIN 3126/
ISO 1173
CAUTION
DWC 18-4500
18 V
0–4500 rpm
5/14 Nm
1/4" DIN 3126/
ISO 1173