Getting To Know The Appliance; Control Panel; Operating The Appliance; Opening And Closing The Ventilation Panel - Siemens LC98KA570 Notice D'utilisation

Getting to know the appliance

Explanation
1 Flue
2 Metal mesh grease filter
3

Control panel

4 Ventilation panel
5

Lighting

Operating the appliance

Note: Switch on the extractor hood when you start cooking and
switch it off again several minutes after you have finished
cooking. This is the most effective way of removing the kitchen
fumes.

Opening and closing the ventilation panel

Opening a ventilation panel
Press the middle of one of the ventilation panels until it clicks.
Both panels open, and the appliance is ready to use.
Closing a ventilation panel
Press the middle of one of the ventilation panels until it clicks.
Both panels close. If ventilation is switched on, it switches off
when the panels are closed.

Setting the fan

Note: Always adjust the fan strength to meet current conditions.
If there is a large build-up of steam or fumes, select a high fan
setting.
Switching on
#
Press the button.
■
The fan starts at setting 2.
Press the + or - button to change the fan strength.
■
Switching off
#
Press the button.
Control panel



 

Explanation

1 Fan On/Off
2 Switch on lighting
3 Turn the fan down
4 Display panel

5 Switch fan setting up
6

Intensive setting

7

Fan run-on time

Intensive setting
You can use the intensive setting if there is a large build-up of
odours and fumes/vapours.
›
Press the button while ventilation is switched on.
The intensive setting is activated.
After 10 minutes, the electronics automatically turn the
appliance down to ventilation setting
intensive setting before this time expires, press the
Fan run-on time
x
Press the button.
The fan continues to operate for a further 10 minutes, and
switches off automatically after this time. If the lighting is
switched on, it remains on.
x
Press the button to end the fan run-on time early.
Lighting
The lighting can be switched on and off independently of the
ventilation.
@
Press the button.
Setting the brightness
Press and hold the
reached.

Audible signal

Switching off the audible signal
With the fan switched off, press and hold the
for approx. three seconds.
An acknowledgement signal sounds.
Switching on the audible signal
Repeat the "Switching off the audible signal" process.
  
ƒ
. If you wish to end the
@
button until the desired brightness is
 
›
button.
#
and + buttons
13