Troubleshooting - Xoro HSD 8430 Manuel D'emploi

Check the following guide for the possible cause of a problem before contacting service.
Technical Support of Xoro/MAS:
Tel.: 040/77 11 09 17
Internet: www.xoro.de/support.htm
Sympton
No power
No picture
No sound
The playback picture
has occasional
Brightness is unsta-
ble or noises are
produced on play-
back pictures
The DVD player does
not start playback
Buttons do not work

TROUBLESHOOTING

Cause
The power plug is discon-
nected
•
The TV is not set into re-
ceive DVD signal output
•
The video cable is not con-
nected securely
•
The DVD video mode is not
matched with the TV
•
The audio cable is not con-
nected securely
•
The power of the equipment
with the audio cable is
turned off
•
The setting of output sound
type is not correct
•
The disc is dirty
•
It is in fast forward or fast
reverse playback
•
The copy protection effect
•
No disc inserted
•
An unplayback disc in in-
serted
•
The disc is placed upside
down
•
The disc is not placed within
the guide
•
A menu is on the screen
•
The parental lock function is
set
Power supply fluctuations or
other abnormalities such as
static electricity may interupt
correct
Correction
Connect the power plug into the
wall outlet
•
Select the appropriate video
input on the TV so the picture
from the DVD player appears on
the TV screen
•
Connect the video cable into the
jacks securely
•
Refer to connecting to a TV
•
Connect the audio cable into the
jacks
•
Turn on the equipment con-
nected with the audio cables
•
Set the audio settings correctly
•
Eject the disc and clean it
•
Sometimes a small amount of
picture distortion may appear.
This is not malfunction.
•
Connect the DVD player to the
TV directly
•
Insert a disc
•
Check the disc type and colour
system
•
Place the disc with the correctly
•
Place the disc on the disc tray
correctly inside the guide
•
Clean the disc
•
Press the SETUP button to turn
off the menu screen. Cancel the
parental lock function or change
the parental.
Turn the power on or off with the
POWER button or disconnect the
power plug and insert it into the
wall outlet again.
40