Responsibilities Of The User; Designated Use - Abicor Binzel MT 452 W Mode D'emploi

MT/AUT/AUT RAB
1 Identification
1.1 CE marking

1.2 Responsibilities of the User

2 Product Description

2.1 Designated Use

2.2 Use contrary to the designated use
The MIG/MAG welding torches are used in industry and in the trade for inert
gas welding using inert gases (MIG) or active gases (MAG). They are
available as machine-operated torches and can be used in all welding
positions. Depending on the model, they are air- or liquid-cooled. The liquid-
cooled model requires a re-circulating cooling unit. These operating instructions
only describe MIG/MAG welding torches MT/AUT/AUT RAB.
The MIG/MAG welding torches may only be operated using original
ABICOR BINZEL spare parts.
This device fulfills the requirements of the valid EU directives.
The conformity is confirmed by the CE marking on the
device.
Within the EEA (European Economic Area) the current version of the national
implementation of the Framework Directive (89/391/EEC) and the related
individual directives and, of these, especially Directive (89/655/EEC)
concerning the minimum safety and health requirements for the use of work
equipment by workers at work must be adhered to. In Germany, the Job
Protection Law and the Company Safety Ordinance must be heeded. In
addition, the operator must ensure that the welding torches in connection with
welding units comply with the EC EMC Directive (2014/30/EU) and that the
signal utilisation of the integrated welding current monitoring against stray
currents is installed properly.
The MIG/MAG welding torches are used for safe welding of low- and high-
alloy materials in machine. Designated use also includes the observance of the
prescribed operating, maintenance and servicing conditions.
Any use other than that described under "Designated Use" is considered
contrary to the designated use. Unauthorised conversions or power increase
modifications are not allowed.
1 Identification
EN - 3