How To Operate Function And How To Set Up; Attenuate Function; How To Set Up Attenuation Level - Marantz SC-7S1 Mode D'emploi

7. How to operate function and how to set up

I Attenuate function
With one touch, the volume can be down. Convenient when
control amplifier sc- 7s1
you want volume down quickly.
ATT button on SC-7S1 or Remote controller can decay vol-
ume.
Unit
power
DISPLAY ATT
Then volume is indicated, the indicator above ATT button will
be light on.
stereo control amplifier sc - 7s1
A SYNC
power
Initial set up is -20dB, you can change to -20dB, -40dB,
-60dB, - .
In case of - , attenuator doesn't work.
stereo control amplifier sc- 7s1
I How to set up attenuation level
q Press ATT button more than 2 second.
power
w Indicator above ATT button will flash, volume indication
will be changed to attenuation level setting.
stereo control amplifier sc- 7s1
A SYNC
power
16
input selector
Remote Controller
E EXIT ATT
volume or
TRIM B
B
DISPLAY ATT
DISPLAY ATT
volume
B
DISPLAY ATT
stereo control amplifier sc- 7s1
e Press ATT button, attenuation level will be changed ev-
ery each press.
power
Attenuat function
Light
r Unless the button is pressed within 2 seconds, attenua-
tion level will be fixed. Once the level is fixed, the indica-
volume
tion will turn back to volume indication.
The setting of level is memorized even after power off, remain
until power on again.
Flash
volume
DISPLAY ATT
volume
Setting of level
-20 dB
-40 dB
Press ATT button
-60 dB
- ∞