Ardo CARUM Mode D'emploi page 7

6. Cleaning at home
After each use, wash the pumpset with dishwashing liquid and rinse well. Once a day, disassemble the
pumpset and boil the parts for 10 minutes or clean in the dishwasher, microwave (in the microwave bag)
or steam steriliser (follow the manufacturer's instructions), then dry with a clean cloth and cover.
ATTENTION: After boiling, allow the parts to cool down before you touch them.
The illustrated parts can be wiped down with a cloth as needed. It is not
necessary to flush the tube.
Do not boil the bottle holder.
Do not clean the lip valve with a brush.
7. Cleaning in hospitals (only for the Clinic Pumpset)
Sterilise the disassembled pumpset at 121°C (250°F) for 20 min / 134°C (273°F) for 5 min.
8. Use
Wash your hands thoroughly. Sit in a comfortable and
relaxed position.
8.1 Expressing with one pumpset
• Connect the pumpset to the Ardo breastpump.
• Centre your nipple so that it moves freely in the breast
shell (breast shell insert) when pumping.
• Switch the breastpump on.
8.2 Expressing with a double pumpset
• Connect the second pumpset to the Ardo breastpump.
• Procedure for the Ardo Carum, Ardo Alyssa and
Ardo Bellis breastpumps: Place a pumpset on the
breast, switch the pump on and place the second
pumpset on the other breast. Alternatively, you can also
attach both pumpsets at the same time.
• Procedure for the Ardo Calypso breastpump: Attach
both pumpsets at the same time (see illustration). Switch
the pump on and hold each pumpset separately in your
hands.
en
3