HIKOKI NH 18DSL Mode D'emploi page 9

SYMBOLS
WARNING
The following show symbols used for the machine.
Be sure that you understand their meaning before
use.
NH18DSL: Cordless Auto Hammer
To reduce the risk of injury, user must read
instruction manual
Operators and others in work area must wear
safety glasses with side shields.
Never point tool at yourself or others in work
area.
Disconnect the battery
Do not use on scaff oldings, ladders.
SPECIFICATIONS
1. Cordless Auto Hammer
Model
Voltage
Number of blows
Applicable Nail
Applicable Nail Length
Weight*
2
Dimension
Height × Length
*1: Opposing Wood: SPF, Cedar
May not be able to fully drive a nail into hard materials such as hemlock spruce, MDF or laminated lumber.
*2: Weight: According to EPTA-Procedure 01/2003
NOTE
Due to HiKOKI's continuing program of research and development, the specifi cations herein are subject to change
without prior notice.
Only for EU countries
Do not dispose of electric tools together with
household waste material!
In observance of European Directive 2002/96/
EC on waste electrical and electronic equipment
and its implementation in accordance with
national law, electric tools that have reached
the end of their life must be collected separately
and returned to an environmentally compatible
recycling facility.
Direct current
Weight
(According to EPTA-Procedure 01/2003)
kg
Switching ON
Switching OFF
Warning
Prohibited action
NH18DSL
18 V
4000 min
-1
ø1.7 – 4.1 mm (See Table 1)*
25 mm to 90 mm*
1.3 kg (BSL1815)
135 mm × 285 mm (BSL1815)
9
English
1
1