HIKOKI NH 18DSL Mode D'emploi page 10

English
NAIL SELECTION
Use nails in following sizes for this Auto Hammer.
WARNING
● Do not use nails in any other size.
They may damage the rod or be shot in a slanting direction.
● Be careful of nail head sizes. Nail head size may vary between large and small with commercially available
bulk nails.
● Do not use hardened nails.
NOTE
● May not be able to fully drive a nail into hard materials such as hemlock spruce, MDF or laminated lumber.
Min.
4.4 mm
(0.172")
1.7 mm
(0.067")
Table 1
10
Max.
8.7 mm
(0.344")
4.1 mm
(0.162")