Additional Safety Warnings - HIKOKI NH 18DSL Mode D'emploi

English
c) When battery pack is not in use, keep it away
from other metal objects, like paper clips, coins,
keys, nails, screws or other small metal objects,
that can make a connection from one terminal to
another.
Shorting the battery terminals together may cause
burns or a fi re.
d) Under abusive conditions, liquid may be ejected
from the battery; avoid contact. If contact
accidentally occurs, fl ush with water. If liquid
contacts eyes, additionally seek medical help.
Liquid ejected from the battery may cause irritation or
burns.
6) Service
a) Have your power tool serviced by a qualifi ed
repair person using only identical replacement
parts.
This will ensure that the safety of the power tool is
maintained.
PRECAUTION
Keep children and infi rm persons away.
When not in use, tools should be stored out of reach of
children and infi rm persons.
CORDLESS AUTO HAMMER SAFETY
WARNINGS
1. Always assume that the tool contains nails.
Careless handling of the Auto Hammer can result in
unexpected fi ring of nails and personal injury.
2. Do not point the tool towards yourself or anyone
nearby.
Unexpected triggering will discharge the nail causing an
injury.
3. Do not actuate the tool unless the tool is placed
fi rmly against the workpiece.
If the tool is not contact with the workpiece, the nail may
be defl ected away from your target.
4. Disconnect the tool from the power source when
the nail jams in the tool.
While removing a jammed nail, the Auto Hammer may
be accidentally activated if it is plugged in.
5. Do not use this Auto Hammer for fastening electrical
cables.
It is not designed for electric cable installation and may
damage the insulation of electric cables thereby causing
electric shock or fi re hazards.
6. Wear ear protectors
Exposure to noise can cause hearing loss.
7. Use auxiliary handle(s), if supplied with the tool.
Loss of control can cause personal injury.
8. Hold power tool by insulated gripping surfaces,
when performing an operation where the fastener
may contact hidden wiring.
Fasteners contacting a "live" wire may make exposed
metal parts of the power tool "live" and could give the
operator an electric shock.

ADDITIONAL SAFETY WARNINGS

1. Safe operation through correct usage.
This tool was designed for driving nails into wood and
similar materials. Use it for its intended purpose only.
2. Be careful of ignition and explosions.
Since sparks may fl y during nailing, it is dangerous to use
this tool near lacquer, paint, benzine, thinner, gasoline,
gas, adhesives and similar infl ammable substances as
they may ignite or explode. Under no circumstances
should this tool therefore be used in the vicinity of such
infl ammable material.
3. Always wear eye protection (protective goggles).
When operating the power tool, always
wear eye protection, and ensure that
surrounding people wear eye protection
too.
The possibility of fragments of the nails
that were not properly hit entering the
eye is a threat to sight. Eye protection can be bought at
any hardware store. Always wear eye protection while
operating this tool. Use either eye protection or a wide
vision mask over prescription glasses.
Employers should always enforce the use of eye
protection equipment.
4. Protect your ears and head.
When engaged in nailing work please wear ear muffl ers
and head protection. Also, depending on condition,
ensure that surrounding people also wear ear muffl ers
and head protection.
5. Pay attention to those working close to you.
It would be very dangerous if nails that were not properly
driven in should hit other people. Therefore, always pay
attention to the safety of the people around you when
using this tool. Always make sure that nobody's body,
hands or feet are close to the nail outlet.
6. Never point the nail outlet towards people.
Always assume the tool contains
fasteners.
If the nail outlet is pointed towards
people, serious accidents may be
caused if you mistakenly discharge the
tool. When connecting and disconnecting the battery,
during nail loading or similar operations, be sure the nail
outlet is not pointed towards anyone (including yourself).
Even when no nails are loaded at all, it is dangerous to
discharge the tool while pointing it at someone, so never
attempt to do so. No horseplay. Respect the tool as a
working implement.
7. Check rod before use.
Make sure the rod operates properly. Never use the Auto
Hammer unless the rod is operating properly, otherwise
the Auto Hammer could drive a nail unexpectedly. Do
not tamper with or remove the rod, otherwise the rod
becomes inoperable.
8. Use specifi ed nails only.
Never use nails other than those specifi ed and described
in these instructions.
9. Be careful when connecting the battery.
When connecting the battery and loading nails in
order not to fi re the tool by mistake, make sure of the
followings.
○ Do not touch the trigger.
○ Do not allow the fi ring head to contact with any
surface.
○ Keep the fi ring head down.
Strictly observe the above instructions, and always
make sure that no part of the body, hands or legs is
ever in front of the nail outlet.
10. Do not carelessly place your fi nger on the trigger.
Do not place your fi nger on the trigger except when actually
nailing. If you carry this tool or hand it to someone while
having your fi nger on the trigger, you may inadvertently
discharge a nail and thus cause an accident.
11. Press the nail outlet fi rmly against the material to
be nailed.
When driving in nails, press the nail outlet fi rmly against
the material to be nailed. If the outlet is not applied
properly, the nails may rebound.
6