6.0 maintenance
maintenance
EN
WARNING
!
•
Turn off the gas and electrical power before servicing the appliance.
•
Appliance may be hot. Do not service until appliance has cooled.
For qualifi ed technicians only:
•
Label all wires prior to disconnection when servicing controls. Wiring errors can cause improper and dangerous
operation. Verify proper operation after servicing.
•
This appliance and its venting system should be inspected before use and at least annually by a qualifi ed service
person.
•
The fl ow of combustion and ventilation air must not be obstructed.
DOS
•
Clean your glass guard assembly (LVX only)
regularly (see "care of glass" section.) Clean your
safety barrier (L and LV only) or regularly to prevent
the build up of excessive lint/dust from carpeting,
pet hair, etc. Simply vacuum using the brush
attachment.
•
Always use ammonia-free glass cleaners.
•
Service your appliance annually and/or as
required. Service must be conducted by a qualifi ed
technician.
•
Keep your appliance area clear and free of
combustible materials, gasoline, or other fl ammable
vapors and liquids.
•
Check to see that the burner ignites completely
on all openings when turned on. A 5 to 10 second
total light-up period is satisfactory. Service as
required.
note:
For any questions and/or concerns regarding your appliance, maintenance and service, please contact your
authorized dealer.
20
W415-2036 / A / 10.18.19
DON'TS
•
Attempt to service the electrical or gas
components. Contact a qualifi ed technician.
•
Use excessive force.
•
Use abrasive cleaners on glass.
•
Paint the pilot assembly.
•
Place objects too close to the fi replace opening
(all models) or air inlet and air outlet (LV models
fi tted with optional DHC and LVX models)