Napoleon Acies Série Manuel Du Propriétaire page 18

5.0 clearances around fi replace Dynamic Heat Control™
EN
WARNING
!
• The Dynamic Heat Control™ system is not available for any appliance from the Acies series (L
models). Do not follow any instructions provided in the "Dynamic Heat Control™ (LV optional / LVX included)"
section if you have an L model. Refer to your appliance installation manual or contact your authorized dealer for
more information. Fire hazard!
• Your appliance, gas/electrical connections, venting and various key components are hidden behind the wall. It
is critical that no screws penetrate the areas illustrated below. Failure to follow instructions may cause improper
operation, damage, personal injury or fi re. Always use a stud fi nder and only screw into studs.
Ceiling
Stud
important:
If in doubt, refer to your installation manual and/or contact your authorized dealer.
18
W415-2036 / A / 10.18.19
Safety Barrier
(L illustrated)
The temperatures above the
fi replace for L models will
be hot, making it unsuitable
for mounting a TV or other
objects sensitive to heat
above the fi replace without
risk of damage.
Installing a mantel
between this appliance and
electronics or other materials
that may be sensitive to
heat will reduce the effect of
direct heat on them.
The size and material of
the mantel will affect the
allowable clearance above
your fi replace and incorrect
placement could become
a fi re hazard. Consult your
installation manual and/or
authorized dealer for more
information.
Your fi replace, gas/electrical
connections and vent are
hidden directly behind the
fi nished wall. Great care
should be taken to avoid
screwing or nailing into these
components. Always use a
stud fi nder to determine stud
location and only screw into
studs.
Do not screw into the area
around the fi replace opening.
No screws
in this area.
(Screw restriction applies
to ALL models.)