Description Of The Appliance; Before Using For The First Time - Beper 90.055H Manuel D'instructions

EN
Multifunctional food grater Use instructions

DESCRIPTION OF THE APPLIANCE

1 Pusher
2 Cone holder / Feed tube
3 On/off switch
4 Power cable
5 Cones
6 Storage accessory
A - Coarse Grating cone (red)
B - Fine Grating cone (orange)
C ­ Thick Slicing cone (dark green)
D ­ Thin Slicing cone (light green)
E ­ Coarse grinding cone (yellow)

BEFORE USING FOR THE FIRST TIME

• Clean the accessories (cones, cone store and pusher) with soapy water. Rinse and dry thoroughly.
WARNING: The cone blades are extremely sharp. Handle the cones carefully, always holding them
by the plastic part.
USE
• Choose the cone which corresponds to the desired use.
• Fit the cone holder (2) on the motor unit (Fig.1) by giving it a quarter turn to the left (Fig.2).
• Place the chosen cone into the opening at the front of the holder (D). The cone should be correctly
positioned all the way into the drive (Fig.3).
• Plug in the appliance.
• Press the On/Off button (3) once or twice to lock the cone (Fig.4).
• Insert the food through the feed tube (2) and push the food down using the pusher (1) (Fig.6).
• To change the cone, turn the holder (2) a quarter turn to the right (Fig.7), then return it to the upright
position (Fig.8). Remove the cone (Fig.9).
WARNING: Before running the appliance, always make sure that the cone is perfectly positioned on
the motor drive unit (Figs.3 & 4). Your product is fitted with an On/Off button (3). To run the appliance
continuously, hold this button down.
15