Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
III
– Using the Karbu Link remote control
3.1 Button functions
1
C (Cancel/Annuler) button to black out a line.
2
Val (Validate/Valider) button to validate the input.
3
Numeric keypad to input prices.
4
LED for transmitting the HF radio signal.
5
Sel (Selection/ Sélection) button to select a line.
6
Tst (Test) button to test all the LED lines.
7
Navigation key to scroll up or down the selection of LED lines.
3.2 Pairing the remote control
The keypad can be paired for a 10-minute period after:
> Starting the Karbu Link.
> Sending the new pairing request from the Karbu Config software in Advanced mode (see corresponding
instructions).
The Karbu Link exits pairing mode:
> After the 10-minute period.
> As soon as a pairing command is received.
> As soon as a button is pressed from an already paired remote control (pairing of a second keypad.)
3.3 User menu
Petrol price sign test
1) Press
: display of all segments of all modules as well as decimal point.
2) Second press of
sided petrol price signs, the third module from the right will be "A" or "B" according to the side.
Example: Single-sided: from "01" to "20". Double-sided: from "A01" to "A10" and from "b01" to "b10".
3) Third press of
: all lines are blacked out (switched off.)
4) Fourth press of
: return to starting display.
Note: if there is no action on the keypad for a 15-second period, the starting display returns.
Selecting a line to modify the price
A line is selected by repeated pressing of the
When a line is selected, it flashes.
Inputting a price
After selecting a line, input the price using the numeric keypad.
Validate the price line and move on to the next line by pressing
Validate all the price lines by pressing
: flashing display of the line number on both right-hand modules of the line. For double-
or change line by validating with
or the
.
.
4
5
3
6
1
2
.
EN
7
9
Publicité
Table des Matières
