Safety Warnings - Festool TPC 18/4 Notice D'utilisation D'origine

Contents
1 Symbols..................................................... 15

2 Safety warnings.........................................15

3 Intended use..............................................17
4 Technical data........................................... 17
5 Parts of the device.....................................17
6 Battery pack.............................................. 18
7 Commissioning..........................................18
8 Settings......................................................18
9 Tool holder, attachments..........................19
10 Working with the electric power tool........19
11 Warning signals.........................................20
12 Service and maintenance..........................20
13 Environment.............................................. 20
14 General information.................................. 21
1 Symbols
Warning of general danger
Warning of electric shock
Read the operating instructions and
safety instructions.
Wear ear protection.
Wear a dust mask.
Wear protective goggles.
Wear protective gloves when changing
tools and working with raw materials.
Inserting the battery pack.
Remove the battery pack.
Hold in this position.
Only assemble by hand!
Do not dispose of it with domestic
waste.
CE marking: Confirms the conformity
of the power tool with the European
Community directives.
Tool contains a chip which stores data.
See section 14.1
Tip or advice
Handling instruction
UKCA marking: The United Kingdom
Conformity Assessed symbol is a
marking for products being placed on
the market in the United Kingdom. It is
a manufacturers indication that the
product is in conformance with the rel­
evant regulations in the UK.
2 Safety warnings
2.1 General power tool safety warnings
WARNING! Read all safety warnings, in­
structions, illustrations and specifica­
tions provided with this power tool. Failure to
follow all instructions listed below may result in
electric shock, fire and/or serious injury.
Save all warnings and instructions for future
reference.
The term "power tool" in the warnings refers to
your mains-operated (corded) power tool or
battery-operated (cordless) power tool.
Follow the operating manual for the charger
and the battery pack.
2.2 Machine-specific safety notices
Wear ear protectors when impact drilling.
-
Exposure to noise can cause hearing loss.
Use the auxiliary handle(s). Loss of control
-
can cause personal injury.
Hold the power tool by insulated gripping
-
surfaces, when performing an operation
where the cutting accessory or fasteners
may contact hidden wiring. Cutting acces­
sory contacting a "live" wire may make ex­
posed metal parts of the power tool "live"
and could give the operator an electric
shock.
Use appropriate detection devices to look
-
for any hidden supply lines or consult your
local utility company. If the insertion tool
makes contact with live cables, it can result
in fire and electric shock. Damage to a gas
pipe can lead to an explosion. Penetration
of a water pipe can result in damage to
property.
Keep the power tool away from magnetic
-
fields. The power tool may switch on unex­
pectedly and cause injury.
English
15