Safety Warnings - Festool DWC 18-2500 Notice D'utilisation

Contents
1 Symbols..................................................... 13

2 Safety warnings.........................................13

3 Intended use..............................................14
4 Technical data........................................... 14
5 Parts of the machine.................................15
6 Commissioning..........................................15
7 Settings......................................................15
8 Tool holder, attachments..........................15
9 Working with the machine........................ 16
10 Working instructions.................................17
11 Service and maintenance..........................18
12 Environment.............................................. 18
13 General information.................................. 18
1 Symbols
Warning of general danger
Warning of electric shock
Read the operating manual and safety
instructions.
Wear ear protection.
Wear protective goggles.
Do not dispose of it with domestic
waste.
CE marking: Confirms the conformity
of the power tool with the European
Community directives.
Tip or advice
Handling instruction
Inserting the battery pack
Removing the battery pack
2 Safety warnings
2.1 General power tool safety warnings
WARNING! Read all safety warnings, in­
structions, illustrations and specifica­
tions provided with this power tool. Failure to
follow all instructions listed below may result in
electric shock, fire and/or serious injury.
Save all warnings and instructions for future
reference.
The term "power tool" in the warnings refers to
your mains-operated (corded) power tool or
battery-operated (cordless) power tool.
Follow the operating manual for the charger
and the battery pack.
2.2 Machine-specific safety notices
Hold the power tool by insulated gripping
-
surfaces, when performing an operation
where the fastener may contact hidden
wiring. Fasteners contacting a "live" wire
may make exposed metal parts of the pow­
er tool "live" and could give the operator an
electric shock.
Use appropriate detection devices to look
-
for any hidden supply lines or consult your
local utility company. If the insertion tool
makes contact with live cables, it can result
in fire and electric shock. Damage to a gas
pipe can lead to an explosion. Penetration
of a water pipe can result in damage to
property.
-
Wear suitable personal protective equip­
ment: Ear protection and safety goggles.
CAUTION! Power tool can jam and cause
sudden kickback! Switch off immediately!
Hold the power tool firmly in your hand.
-
Make sure the speed is adjusted correctly
when screwdriving. Be prepared for a high
reaction torque, which may cause the pow­
er tool to turn and possibly lead to injury.
Do not use the power tool in the rain or in
-
damp surroundings. Moisture in the power
tool may cause a short circuit and fire.
- Do not lock the on/off switch in place per­
manently.
- Connecting the magazine attachment and
drywall screwdriver results in a tool for
which the safety warnings and instructions
of the drywall screwdriver apply.
English
13