Safety Instructions - Klarstein JET SET 2500 Mode D'emploi

EN
16

SAFETY INSTRUCTIONS

Protection against electric shock
• Have repairs carried out only by trained specialist personnel.
• Only connect the dryer to sockets that correspond to the specified voltage of the
appliance.
• If the power cord is damaged, have it replaced by the manufacturer, customer
service or a qualified person.
• Do not pull the plug out of the socket by the cable, but hold it firmly by hand when
removing it.
• Do not use the power cord if the connection between the plug and the power cord
has become loose.
• Do not handle the plug with wet hands. Remove dust and drops of water with a dry
cloth.
• Do not bend the power cord excessively or place heavy objects on it.
• Do not use the plug, power cord, or outlet if any of these parts are damaged.
Protection against possible explosions
• Make sure that there are no flammable liquids in the vicinity of the device.
• Do not remove or insert the plug if petrol vapours or gas have escaped in the
vicinity.
Fire and short-circuit protection
• Do not place the unit near heat sources or open fire.
• Do not place burning candles on the product.
• Do not place the unit in very humid or extremely wet locations.
• Be careful not to expose the product to direct sunlight, as plastic or rubber parts will
age quickly.
• Do not sprinkle the dryer with water for cleaning. Do not use a high-pressure
cleaner.
• To prevent the risk of fire due to intensive drying, do not dry cushions, quilts or
similar items inside the appliance.
• Clothing and objects that have come into contact with vegetable and edible oil
after washing must not be dried in the dryer.
• If you have treated your laundry with stain remover, it needs an additional rinse
before drying.
• Before drying, make sure that there are no lighters left in the pockets of your clothes.
• Do not finish the drying process before the end of the program. Remove the
garments quickly at the end of the program so that the accumulated heat can
quickly escape.