Dexter 900ID2.5 Mentions Légales & Consignes De Sécurité page 197

2. SAFETY INSTRUCTIONS
• If you are interrupted when operating the drill, complete the process and
swit re looking up.
• Periodically check that all nuts, bolts and other fixings are properly tightened.
• When using the drill, use safety equipment including safety glasses or shield,
hearing protection, and protective clothing including safety gloves. Wear a
dust mask if the drilling operation creates dust.
• Children and frail people must not use this tool. Children should be supervised
at all times if they are in the area in which the tool is being used. It is also
imperative that you observe the accident prevention regulations in force in
your area.
• Even when the tool is used as prescribed it is not possible to eliminate all
residual risk factors.
• The following hazards may arise in connection with the tool's construction
and design:
√ Damage t
√ Damage t
√ Hand-arm vibration syndrome if its use is not adequately managed.
3. DESCRIPTION
1. Keyless chuck
2. On/Off Switch
1
Keyless chuck
3. Lock-on button
2
ON/OFF switch
4. Variable speed dial
3
Lock-on button
5. Forward/reverse switch
4
Variable speed dial
6. Impact/Drill switch
5
Forward/reverse control
7. Auxiliary handle
6
8. Gauge
Impact/Drill switch
7
Auxiliary handle
8
Gauge
2. SAFETY INSTRUCTIONS
ctive dust mask is not worn.
ctive hearing protection is not worn.
7
1
1
8
6
7
197
6
3. DESCRIPTION
5
6
4
5 2
4
2
FR
ES
PT
IT
EL
PL
UA
RO
EN
3
3
EN