Explanation Of Symbols; Special Safety Instructions - Ferm FCO-2050 Mode D'emploi

Table des Matières

Publicité

GB
10. Pressure pipe
11. Air filter
D
12. Oil cap
13. Sump
14. Drain cock
NL
2. SAFETY INSTRUCTIONS
F

Explanation of symbols

The following symbols are used in these instructions for use:
E
Read the instructions.
P
In accordance with essential applicable safety standards of European directives.
I
Denotes risk of personal injury, loss of life or damage to the tool in case of non-
observance of the instructions in this manual.
S
Risk of electric shock.
FIN
Remove the plug from the mains
N
Attention: the compressor could start automatically in case of a black-out and
subsequent reset
DK
Caution: the compressor contains some parts wich might reach high temperatures
Wear ear protection.
Sound power level
Faulty and/or discarded electrical or electronic apparatus have to be collected at
the appropriate recycling locations.

Special safety instructions

Warning! The compressor may only be used in suitable rooms (with good ventilation and
an ambient temperature from +5°C to +40°C).
It is recommended to use the compressor with a maximum operation of 70% in one hour
under full load, to allow for proper operation of the product over time.
06
Ferm
Ferm
GB
D
NL
F
E
P
I
S
FIN
N
DK
95

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Crm1030

Table des Matières