Remote Control - Yamaha MCS-1330 Mode D'emploi

Remote control

iPod
FM/AM
■
Common
functions
1
2
iPod
3
FM/AM
REPEAT
iPod MENU SEL
TONE BALANCE
DISPLAY DIMMER
4
PURE DIRECT
CD USB
Input
PHONO AUX
selection
keys
PRESET
TUNING
MEMORY
CD USB
PHONO AUX
PRESET
TUNING
MEMORY
RANDOM
MENU
ENTER
VOL
5
VOL
6
7
SLEEP
8
MUTE
9
This remote control can operate the system components
(including tuner functions) and an iPod stationed in a
terminal on the top of the receiver.
To operate the CD player, tuner functions, or an iPod
using the remote control, you need to set the receiver to
the corresponding input mode.
To switch the input mode of the receiver
Press the corresponding input selection key on the remote
control (or rotate INPUT on the front panel).
The name of the corresponding input source appears in the
front panel display of the receiver.
y
When CD or USB is selected as an input source, the CD
player turns on automatically and when other input source
is selected, the CD player sets to standby mode.
Operations common to all modes
The following operations are available for the receiver
when it is set to any input mode.
1 Infrared signal transmitter
Sends signals to the system you want to control.
2
(standby/on)
Turns the system on or sets it to the standby mode.
Note
Even when the system is in standby mode, it consumes a small
amount of power in order to receive infrared-signals from the
remote control.
3 Input selection keys
Select the input source on the receiver.
4 PURE DIRECT
Turns on or off the Pure Direct mode (see page 12).
5 VOL +/–
Adjusts the overall volume level on the receiver.
6 TONE/BALANCE
Adjusts the audio quality (see page 12).
7 SLEEP
Sets the sleep timer on the system (see page 13).
8 MUTE
Turn off the volume (see page 12).
9 DIMMER
Changes the brightness of the front panel display (see
page 13).
CONTROLS AND FUNCTIONS
/
5
En