MCONFORT
IX. GUIDE FOR ADDING WATER AND DRAINING
1-. Adding water:
Open the cover as picture. And then add watter. By watching the water gauge to
make sure whether the tank is full of water.
Note:
1-. Please do not splash water to motor and other parts to avoid damage to electron component.
2-. Adding water to MAX line is ok, if not water may come out from the cooler.
3-. Pleas add clean water to the cooler.
2-. Draining: Pull out the plug in the bottom.
X. GUIDE FOR INSTALLATION AND DISMONTING OFF BACK PANEL
16
E3500 S / E3500 XL
1-. Discharge the screws at the back panel.
2-. Press down the clips and pull out the
panel.
3-. Discharge the screws between the
back and front panel.
4-. Holding the back panel and pull it out.
5-. In reverse the avobe operation to
installation back panel.