Operation Guide; Caution; Instruction For Use - M Confort E3500S Manuel De L'utilisateur

V. OPERATION GUIDE
Avoid using the evaporative air cooler in a closed area. The unit should be used only in
well-ventilated areas.
Before turning on the unit, fill the tank with water to ensure efficient operation of the
evaporative air cooler. Avoid operating the COOL function while the water tank is empty.
REMARKS: The water level must not exceed the limit of the water level scale.
Drain the water tank and clean the tank frequently.
Fill the tank with clean water only, do not put any other liquid in the tank.
Make sure that the operating voltage is not lower than the normal voltage (220 V) or
exceeds 5% of the normal voltage. If the voltage is less than the limit, the air cooler can not
work without problems or even turn on. If the voltage is higher than the limit, it can cause
damage to the machine.
Remove the plug from the socket when the machine is not in use.
VI. CAUTION
Be careful with spilled water while moving the unit.
Do not place anything on top of this air cooler or obstruct the air inlet and outlet.
Do not insert any object into the ventilation while the machine is running.
Unplug the machine before cleaning to avoid electric shock.
Stop operating this air cooler immediately if it operates abnormally, for example, if the
power cord is damaged, there is a loss of electricity and contact our service center for
further instructions. It is not recommended that the user disassemble and repair the
machine.
VII. INSTRUCTIONS FOR USE
VII.I. ON/OFF.
When in standby, pres ON/OFF or
before shutdown. When first power on, the cooler is default to run mode and low speed.
The cooler will run 30s in low speed and then recover to previous running speed before
hsutdown.
When is runing state, press ON/OFF or
the cooler is shutdown in cool mode, it will keep running 10s in vent mode with low speed
before cooler stops..
, the cooler will run as previous mode and speed
, the cooler will enter into standby state. When
13