M Confort E3500S Manuel De L'utilisateur page 18

MCONFORT
VII.II. COOL MODE.
When it vent mode, press COOL or
off.
When in COOL mode,
disappear with 1 buzzer "DiDi" sound when water recovers to standard level.
VII.III. VENT MODE.
When it cool mode, press VENT or
VII.IV. SPEED SWITCH.
Press SPEED or
VII.V. SWING FUNCTION.
Press SWING or
VII.VI. TIMER ON/OFF.
When cooler is running, press TIMER or
or for timer function. TIMER ON/OFF can be set between 0,5 - 7,5 hours with timer icon
on.
Timer setting steps:
1-. When cooler running or in standby, press TIMER or
2-. Set timer between 0,5 - 7,5 hours. 0,5 hours will be increased when press
TIMER or
3-. Timer setting will be saved automatically after 5s with a timer icon.
How to cancel TIMER:
a-. Set the timer as 0.
b-. Press ON/OFF when timer icon flashing.
c-. Press ON/OFF twice (that is to restart) when timer icon on.
VII.VII. PRE-COOL WHEN COOLER ON.
When pre-cool function is set, the cooler will start with pre-cool automatically (first power
on or previous shutdown with cool mode). Pre-cool time can be set between 0-4 mins (.5
means 1 min; 1 means 2 min; 1+.5 means 3 mins, 2 means 4 mins)
How to set pre-cool function:
1-. When cooler in standby, press COOL 3s then loose with cool icon flash.
2-. Press SPEED or
decrease 1 min); SPEED button can be used to set pre-cool time circulary (0-4 mins).
be used to increase pre-cool time (max 4 mins) and
time (0 mins that is pre-cool function stops).
14
will flash for water shortage with 5 buzzer "DiDi" sounds.
for speed switch.
to start or stop swing function.
every time. 0 means timer function is closed.
to adjust pre-cool time (press one time to increase or
E3500 S / E3500 XL
, the cooler will enter into COOL mode with vent icon
, the cooler will enter into vent mode with
for timer function; when in standby, press TIMER
with timer icon flash.
can be used to decrease pre-cool
will
off.
can