Cleaning And Manteinance - M Confort P 80H Manuel De L'utilisateur

7. CLEANING AND MAINTENANCE
1. Unplug the power cord before maintenance.
2. Clean the surface of the appliance with a soft damp cloth and wipe it dry with
a dry cloth. Do not allow water to get inside the machine.
3. Note that the surface should not be sandpaper polished, waxed, cleaned with
gasoline, acid, alkali, benzene and other organic solvents to avoid discoloration
and deterioration.
4. When not in use, please clean as above, place in original box and store in
cool, dry and ventilated place.
5. Filters: the equipment filters the air of particles and impurities to improve its
quality and then brings humidity through the cooling filter. For the equipment to
perform optimally, it is essential to keep both the filters and the pre-filters
clean. For cleaning, you can immerse them in water and add a little detergent if
necessary and rub them with a soft brush and rinse them afterwards with clean
water.
6. Water tank: the water in the tank also acts as a filter for air particles, so
traces of dust or dirt can accumulate in the tank. Keep the tank clean and
change the water if you find it dirty.
prefilter prefilter
cooling HEPA
filter filter
09