Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Operation and maintenance
The unit is not suitable for burglar alarm systems as
it is not tamperproof in the manner prescribed for
such systems. Weather can affect operation of the
sensor-switched LED floodlight. Strong gusts of wind,
snow, rain and hail may cause the light to come ON
Technical specifications
Dimensions (H x W x D):
120 x 160 x 107 mm
Power supply:
230 – 240 V AC 50/60 Hz
Output:
70 LEDs 10.5 W
Colour temperature:
4000 K (neutral white) SDCM 4
Luminous flux:
830 lm / 79.0 lm/W
Colour rendering index:
Ra ≥ 80
Projected area:
viewed from front: 187 cm
viewed from side: 61 cm
Weight:
0.570 kg
Angle of coverage:
160° with sneak-by guard
LED life expectancy:
> 50000 h (L70B10 to LM80)
Detection reach:
8 m
Sensor unit swivelling range:
+/- 30°
Time setting:
2 s – 70 min
Twilight setting:
2 – 1000 lux
IP rating:
IP 44
Protection class:
I
Temperature range:
-20°C to +40°C
when it is not wanted because the sensor is unable
to distinguish sudden changes in temperature from
sources of heat.
The detector lens may be cleaned with a damp cloth if
it gets dirty (do not use cleaning agents).
2
2
- 10 -
Troubleshooting
Malfunction
Cause
Sensor-switched LED floodlight
n F use faulty, not switched ON,
without power
break in wiring
n S hort circuit
Sensor-switched LED floodlight will
n I n daylight mode,
not switch ON
twilight setting
set to night mode
n Mains switch OFF
n Fuse faulty
Sensor-switched LED floodlight
n P ermanent movement in the
will not switch OFF
detection zone
Sensor-switched LED floodlight
n A nimals moving in the detection
keeps switching ON and OFF
zone
Sensor-switched LED floodlight
n W ind is moving trees and bushes
switches ON when it should not
in the detection zone
n C ars in the street are being
detected
n S udden temperature changes
due to weather (wind, rain, snow)
or air expelled from fans, open
windows
n S ensor-switched LED floodlight
is moving (swaying) due to gusts
of wind or heavy rain
Declaration of Conformity
This product complies with
- Low-Voltage Directive 2014/35/EU
- EMC Directive 2014/30/EU
- RoHS Directive 2011/65/EU
- WEEE Directive 2012/19/EU
Functional Warranty
This STEINEL product has been manufactured with
the utmost care, tested for proper operation and
safety and then subjected to random sample inspec-
tion. Steinel guarantees that it is in perfect condition
and proper working order. The warranty period is 36
months and starts on the date of sale to the consumer.
We will remedy defects caused by material flaws or
manufacturing faults. The warranty will be met by
repair or replacement of defective parts at our own
discretion. The warranty shall not cover damage to
wear parts, damage or defects caused by improper
treatment or maintenance.
Remedy
n F it new fuse; switch ON mains
switch; check wiring with
voltage tester
n C heck connections
n Adjust setting
n Switch ON
n F it new fuse, check
connection if necessary
n Readjust
n C heck zone and readjust if
necessary or apply shroud
n F it shrouds to target sensor;
adjust detection zone, or fit
shrounds
n C hange detection zone
n C hange detection zone
n C hange detection zone, change
site of installation
n M ount sensor-switched LED
floodlight on a firm surface
Further consequential damage to other objects shall
be excluded. Claims under the warranty will only be
accepted if the unit is sent fully assembled and well-
packed with a brief description of the fault, a receipt
or invoice (date of purchase and dealer's stamp) to
the appropriate Service Centre.
Service:
Our Customer Service Department will
repair faults not covered by warranty or
after the warranty period. Please send
the product well-packed to your near-
est service station.
- 11 -
Publicité
Table des Matières
