Charge The Battery (Two Methods); Power On/Off; Basic Functions; Make A Call - switel M 820 Mode D'emploi

3.5 Charge the battery (Two Methods)

Method 1:
Connect the charger to a wall outlet.
Connect micro USB of the charger to the phone. The charging
indicator starts scrolling. When the battery is fully charged, the
indicator will stop scrolling.
After the battery is fully charged, disconnect the charger.
Method 2:
Connect the
data line
Note: charge the battery at least 12 hours for the first time.

3.6 Power on/off

Press and hold End key to switch on/off the phone.
Note: Make sure the SIM card and the battery have been inserted properly
before startup.
If the phone is switched on but no SIM card is inserted, the screen will
display "Insert SIM1/SIM2".

4. Basic Functions

4.1 Make a call

4.1.1

Dial a Number

In standby mode, enter the phone number and press Send key
twice to make a call.(When you install two SIM cards, press Send
key again to choose SIM1 or SIM2 voice call.)
Press End key or slide down this mobile phone to end the call.
to a PC.
10