List Of Materials; Parts Not Supplied - Elica EVL430S2 Guide D'utilisation, D'entretien Et D'installation

LIST OF MATERIALS

Removing the packaging.
I CAUTION
Remove carton carefully, Wear gloves to protect against sharp edges.
I WARNING
Remove the protective film covering the product before putting into operation.
Supplied Part
Hood assembly and
LED lamps already installed
5x45 mm
5.4x75 mm
3.5x9.5 mm
4x8 mm
Torx 10 adapter
Tools/Materials required
• Level
• Drill
• 1 ⁄ " (3.2 cm), ⁄ " (3.2 mm), and
1 1
4 8
• Pencil
• Wire stripper or utility knife
• Tape measure or ruler
• Pliers
• Caulking gun and weatherproof caulking compound
• Jigsaw or keyhole saw
• Metal snips
• Screwdrivers:
- Flat-blade
- Phillips
Pieces
1
6
4
2
2
1
Parts no supplied
⁄ " (4.8 mm) drill bits
1
1 6
Supplied Part
Duct covers
6" round air transition
8x40 mm
10x60 mm
Duct cover bracket
Mounting template
Optional accessories and consumable parts
KIT
Recirculating Kit
Long Chimney
Extension
Long Chimney
Extension Black
Pieces
2
1
2
4
1
1
# Part
KIT02766
KIT02762
KIT0140998
5