ZUMEX Soul Manuel De L'utilisateur page 10

Shall we start?
PREPARE THE PLACE WHERE YOU ARE GOING TO PUT YOUR SOUL
Have you thought about where you are going to put your machine? You can put it
wherever you want and easily move it whenever you want thanks to its 360° design
and light weight.
1 Firstly, make sure that the mains voltage coincide with the indications given on the
machine identification label that you will find both on the front page of this manual
and on the actual machine.
Ensure that no obstacles hinder you during the unpacking process.
2
Then, take the Zumex Soul out of its packaging and put it on the flat surface that
3
you have prepared.
The following components may come separate, and if so, you must put them in
4
their place: Glass holder base, Glass holder, Power cable.
SOME TIPS BEFORE YOU START
You are a step away from starting to extract juice with Soul. First of all, we are going to
give you some tips for you to have a perfect knowledge of your new juicer.
Initial cleaning
Before using for the first time, we recommend you clean the juice extraction
system. See "Cleaning" section.
Start-up
Check the electrical data of your machine with the electricity supply. Once the
machine is installed correctly, plug it into the mains.
After plugging the machine in, press the button for 1" to switch on the juicer until
a fixed white light appears. This means that the machine is ready to extract juice.
Check that the Waste container and Front door have been correctly fitted;
otherwise a flashing white light will appear.
Remember to open the Tap (lower position) and put
a glass under the juice outlet of your machine.
Place the Glass holder under the tap first.
Juice extraction unit
Check that all the elements of the Juice extraction unit have been mounted correctly.
Loading the feeder
The machine is ready to admit 3 oranges in the feeder, according to the size.
Waste area
Make sure that the Waste container is correctly in place.
Glass holder
Glass holder base
17