Brother NC-7100w Guide D'installation Rapide page 6

To communicate with the un-configured
NC-7100w change your wireless PC settings
to:
Communication mode: Ad-hoc
Network name (SSID): SETUP
Encryption:
For Windows
Windows NT
Please refer to your wireless card
manufacturer instructions for changing the
wireless settings. And then go to Step 3
Configuring the Print Server.
Continue to Step 3
If you are using Windows
X 10.1 to 10.3 and you are using its built in
Wireless Ethernet capabilities, use the
following steps for each Operating
System.
For Windows
1
Click Start and then Control Panel.
5
(channel 11)
(case sensitive)
None
®
98/Me/2000,
®
4.0 Users
®
XP or Mac OS
®
XP Users
2
Click the Network Connections icon.
3
Select and right click Wireless
Network Connection. Click View
Available Wireless Networks.
®
4
You can see the Brother wireless print
server in the Available wireless
networks box. Select SETUP and
check the Allow me to connect...
check box. Click the Connect button.