Brother NC-7100w Guide D'installation Rapide page 9

6
The search will display a list of found
Brother Wireless Devices. Select the
device you wish to configure and click
Next.
7
If your network supports DHCP, choose
Obtain an IP address automatically
and the NC-7100w will automatically
obtain IP address information from your
network.
If you want to manually enter the IP
address settings of the NC-7100w,
choose Set static IP address and
enter the necessary IP address settings
for your network.
After making your selection, click Next
and the Wizard will search for available
wireless networks.
The NC-7100w supports the
Automatic Private IP Addressing
(APIPA) protocol. If a DHCP server
is unavailable, the NC-7100w will
automatically assign an IP address
from the range 169.254.1.0 to
169.254.254.255.
We recommend that you contact
your network administrator if you are
unsure about the correct IP address
settings.
8
A list of the found Wireless Networks
will be displayed. Select the Access
Point/Base Station or Ad-hoc network
you wish to associate the NC-7100w
with and click Next.
If the Access Point/Base Station or
Ad-hoc network does not appear on
the list, you can manually add it by
clicking Add. Follow the on screen
instructions for entering the SSID
and Channel number.
9
If your network is not configured for
Authentication and Encryption, the
screen shown will appear. To continue
installation, click OK.
Go to Step 11.
8