Table des Matières
Publicité
5.
To point the lamp in the desired direction: loosen the hinges using a screwdriver.
6.
Tilt the lamp in the desired angle and tighten the hinges.
5.
Care and Maintenance
Before starting any cleaning or maintenance activities:
1.
Unplug the device's power cord from the outlet.
2.
Let the device cool down.
Cleaning
•
Use normal glass cleaner and a soft cloth to wipe off the outside casing.
•
Always be sure to dry all parts completely before plugging the device back in.
•
Cleaning frequency depends on the environment in which the unit operates (i.e.
smoke, fog residue, dust, dew).
•
Do not immerse the device in any liquid.
Maintenance
•
This luminaire does not have a built-in device to disconnect it from the electric
mains. Make sure to electrically isolate the luminaire before installation or
maintenance activities are performed.
•
All screws should be tightened and free of corrosion.
•
The housing, the lenses, the mounting supports and the installation location (e.g.
ceiling, suspension, trussing) should not be deformed, modified or tampered with;
e.g. do not drill extra holes in mounting supports, do not change the location of the
connections...
•
The electric power supply cables must not show any damage. Have a qualified
technician maintain the device.
•
There are no user-serviceable parts, apart from the fuse and the lamp.
•
Refer to an authorized dealer for service and/or spare parts.
V. 04 – 08/12/2021
LEDA500xxW-x/LEDA5010NW-B
5
N = neutral, blue
E = earth, yellow/green
L = line, brown
©Velleman Group nv
Publicité
Table des Matières
