General Guidelines; Cleaning And Maintenance; Technical Specifications - Perel LEDA77NW Mode D'emploi

3. General Guidelines

Refer to the Velleman® Service and Quality Warranty on the last pages
of this manual.
4. Features
 LED ceiling light
 easy installation
 surface mounting
 waterproof design: IP65
5. Installation
Refer to the illustrations on page 2 of this manual.
1. Mount the base on the ceiling.
2. Connect the power cable. First, cut off the live circuit and make sure
the ground wire is connected. Next, connect the AC power lines to the
neutral (N) and live (L) terminals.
3. Mount the lamp onto the base.

6. Cleaning and Maintenance


This lamp does not need any particular maintenance.

Occasionally wipe the lamp with a damp cloth. Do not use harsh
chemicals, cleaning solvents or strong detergents.

The light source of this luminaire is not replaceable. When the light
source reaches its end of life, the whole luminaire shall be replaced.

7. Technical Specifications

electrical data
power LED module ....................................... 66x 2835 LEDs
total nominal power ............................................... < 12 W
nominal voltage driver ....................... 220-240 V~, 50/60 Hz
power factor ............................................................ > 0.9
energy consumption .................................... 12 kWh/1000 h
light technical data
colour .......................................................... neutral white
colour temperature ................................................. 4000 K
beam angle .............................................................. 120°
luminous flux ....................................................... 1000 lm
colour rendering index ................................................ > 80
starting time ......................................................... < 0.5 s
warm-up time (60 %) ............................................... < 1 s
lifespan
V. 02 – 22/12/2017
LEDA77NW
6 ©Velleman nv