Transportation, Storage And Disposal; Technical Data - Husqvarna BLi550X Manuel D'utilisation

To replace the fuse
1. Examine the fuse. A blown fuse is identified by a
burned connector.
2. Set the power switch to OFF.
Transportation and storage
• The supplied Li-ion batteries obey the Dangerous
Goods Legislation requirements.
• Obey the special requirement on package and labels
for commercial transportations, also those from third
parties and forwarding agents.
• Speak to a person with special training in dangerous
material before you send the product. Obey all
applicable national regulations.
• Use tape on the contacts when you put the battery in
a package. Put the battery in the package tightly to
prevent damage and accidents.
• Do not keep the battery in an area where static
electricity can occur. Do not keep the battery in a
metal box.
• Put the battery in a dry, frost free and clean space
with correct temperature.
For technical data, refer to the rating plate of the battery.
6

Transportation, storage and disposal

Technical data

3. Remove the fuse cover (A). (Fig. 7)
4. Replace the fuse (B).
5. Install the fuse cover.
• Put the battery in storage where the temperature is
between 5 °C (41 °F) and 25 °C (77 °F). Keep the
battery away from sunlight.
• Charge the battery 30% to 50% before you put it in
storage for long periods.
• Clean the battery before you put it in storage.
Disposal
Husqvarna products are not domestic waste and must
only be discarded as given in this manual.
• Obey the local disposal requirements and applicable
regulations.
• Recycle the product and package at an applicable
disposal location.
• Speak to your local Husqvarna dealer for more
information on how to recycle and discard the
product.
1433 - 002 - 25.06.2020