ENGLISH
Daily use
Switching the hob ON/OFF
To switch the hob on, press the
for approx. 2 seconds until the cooking zone
displays light up. To switch off, press the
same button until the displays switch off. All
the cooking zones are deactivated.
If the hob has been in use, the residual heat
indicator "H" remains lit until the cooking
zones have cooled down.
If within 10 seconds of switching on, no
function is selected, the hob switches off
automatically.
Before use
Important: The induction cooking zones will
not switch on if pots and pans are not of the
correct dimensions.
Only use pots bearing the symbol
"INDUCTION SYSTEM".
Before switching the hob on, position the
pot on the desired cooking zone.
Existing pots and pans:
Use a magnet to check whether pots or
pans are suitable for use on the induction
hob: pots are unsuitable if they cannot be
magnetically detected.
1. Ensure pots have a smooth bottom,
otherwise they may scratch the hob's
glass ceramic surface. Check dishes.
2. Do not use empty pots on the hob. This
could result in damage to both the glass
ceramic surface and the bottom of the
pots.
3. Never place hot pots or pans on the
hob's control panel. This could result in
damage.
Switching on and adjusting cooking zones
button
Once the hob is switched on and the pan
is positioned on the chosen cooking zone,
select the zone using the corresponding
button: the display shows level 5.
Each cooking zone has various power levels,
adjustable with the +/- buttons, going from
"1": min. power, to "9": max. power. Some
cooking zones have a fast boil function
(Booster), shown on the display with the
letter "P".
Fast boil function (Booster)
This function, only present on some cooking
zones, makes it possible to exploit the hob's
maximum power (for example to bring
water to the boil very quickly). To activate
the function, press the "+" button until "P"
appears on the display. After 10 minutes'
use of the booster function, the appliance
automatically sets the zone to level 9.
Demo Mode
This hob is equipped with a demo mode
which allows you to interact with the control
panel without activating the corresponding
cooking zones.
The activation and deactivation procedure
must be carried out within 60 seconds of the
appliance being connected to the power
supply in the home.
To activate the demo mode, hold the two
external cooking zone selection buttons at
the same time for at least 5 seconds: "dE"
appears on the central display. You can
now explore the control panel functions.
The Lock and Unlock function is active also
Power indicator display
Selected cooking zone indication
Cooking zone positioning
36