Getting Started - Sony Reader Démarrage Rapide

Navigation Controls
Home menu is
displayed.
 <
> (Page Turn) buttons
Turns the page.

(Home) button
Displays the Home menu.

(Size) button
 OPTIONS button
Displays the Option menu.
 Touch screen
Provides simple commands by
touching the screen.
 Charge indicator
Lights up when the Reader is
charging.

EN
 POWER switch
 Stylus
Used for precise touch screen
operations.
 RESET button
 DC IN jack
Used to connect the AC
Adapter for Reader (AC-
S5220E) (optional).
 USB connector

Getting Started

Connect to
USB connector
1
Charge the Reader via USB (as shown above) at least 5 minutes
until "USB connected" appears on the Reader.
Keep your computer in an active mode while charging the Reader.
To fully charge the Reader, wait about 4 hours or less until the charge
indicator (lights up in red while charging) goes off.
2
Disconnect the Reader from your computer, and then follow the
on-screen instructions of the Reader to complete the initial
settings.
To select an item on the touch screen, tap the item. To apply the
setting, tap "OK."
Note
 You cannot operate the Reader while it is connected to your computer.
"USB connected" screen
To AC outlet
USB cable (supplied)

EN