Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Navigation Controls
"Home" menu
(Home) button
Displays the "Home" menu.
(Return) button
Displays the previous menu/list
screen.
/// (Cursor Move/Page
Turn) buttons
Enter button
Selects an item or applies a
setting.
(Bookmark) button
(Size) button
EN
Number (1-9,0) buttons
Selects the numbered items.
Charge indicator
Lights up in red while charging
POWER switch
USB connector
DC IN jack
Used to connect the AC
Adapter (AC-S5220E)
(optional).
RESET button
Getting Started
Connect to
USB connector
1
Charge the Reader via USB (as shown above) at least 40 minutes
until "USB connected" appears on the Reader.
Keep your computer in an active mode while charging the Reader.
To fully charge the Reader, wait about 3.5 hours or less until the
charge indicator (lights up in red while charging) goes off.
2
Disconnect the Reader from your computer, and then follow the
on-screen instructions of the Reader to complete the initial
settings.
Use the / buttons to move the cursor and the Enter button to select.
To apply the setting, select "OK" with the Enter button.
Note
You cannot operate the Reader while it is connected to your computer.
"USB connected" screen
To AC outlet
USB cable (supplied)
EN
Publicité
Table des Matières
