EUROM Safe-T-Shine 1200 Compact Manuel D'utilisation page 32

Assembly, location and connection
Remove all packaging material and keep out of reach of children. After removing
packaging, check the appliance for damage or other signs that could indicate a
fault/defect/malfunction. In case of doubt, do not use the appliance, but contact
your vendor for inspection or replacement.
The device consists of two parts that you must fit together before use: the actual
device and the base.
 Lead the electrical cable with plug through the middle hole in the base; from top
to bottom (the hollow side of the base is the underside).
 Now slide the base over the small white box with the electrical cable on the
underside of the device: all hollow spaces and protrusions and screw holes on
top of each other. It only fits in one way.
 Now firmly fasten the base and the device together using the two safety screws
included in the package.
32