For Dos Programs - Epson LQ-300+ Démarrage Rapide

Note:
If your CD-ROM drive has a drive letter other than E , substitute the appropriate
letter.
The installation program starts. The subsequent procedure is menu-driven, i.e., you
can select the relevant options from a list simply by clicking with the mouse. The
remainder of the installation is automatic and you do not need to enter any more
information.
4.
Select the desired options and follow the on-screen instructions.
5.
After the printer software has been successfully installed, click on the button
identified by a door icon to exit the installation program.
The installation program automatically selects the LQ-300+ as the default printer for
Windows applications.
For information on opening and using the software, see chapter 3 "Using the Printer
Software" in the online User's Guide.

For DOS programs

To control the printer from DOS application programs, you need to select the printer
you are using or another available printer from the printer list of your application.
Choose the EPSON LQ-300+ printer at the appropriate step in the setup or installation
procedure of your DOS application program. If the list in your application does not
include the LQ-300+ printer, choose the first available printer from this list:
LQ-300
LQ-580/LQ-570e
LX-810/850
LX-800
LX-80/86
FX-850
If you plan to use color, you must choose LQ-300. The other printers cannot use color.
Note:
If your application does not list a suitable alternative, contact the software
manufacturer to see if an update is available.
FX-86e/800
JX-80
EX-800
EPSON LQ printer
EPSON FX printer
EPSON printer
19