Nissei DSK-1031 Instructions page 10

Inflation stops at optimal pressure
and pressure starts to decrease.
PULSE SYMBOL is displayed as
pulse is detected.
MEMORY SYMBOL
Air is released from the cuff and
measured values are displayed as
measurement completes.
Refer to page 3 for [ ].
RELIABILITY SYMBOL
Refer to page 4 for [ ].
WHO CLASSIFICATION SYMBOL
Refer to page 12 for "Err" display.
PULSE PRESSURE
AUTOMATIC REPEATED INFLATION
If you move or strain your arm or hand, inflation may be repeated multiple times to
obtain a measurement. Repeated inflation does not indicate malfunction of the
monitor.
V I E W I N G T H E S A V E D R E A D I N G S ( M E M O R Y F U N C T I O N )
Turn off the monitor once with "START/STOP" KEY when the results are displayed
after a measurement.
PULSE
SYMBOL
PULSE RATE
SYSTOLIC
DIASTOLIC
4 SELECT MEMORY BANK TO SAVE THE MEASUREMENT RESULT.
MEMORY SYMBOL is displayed below MEMORY
KEY.
Touching MEMORY KEY will switch the bank.
TIME
Readings are automatically saved in the bank, either MEMORY [1] or [2], selected
when the monitor is turned off after measurement. Make sure to confirm the bank
selected after a measurement.
Refer to page 4 for memory function.
5 TURN OFF THE MONITOR.
Touch "START/STOP" KEY.
The monitor will be turned off. Even if you do not turn off the monitor, it turns off
automatically after 3 minutes.
Do not execute repeated measurements for congestion of blood could
result in false measurement. Let your arm rest for at least 5 minutes.
Refer to page 4 for memory function.
To delete readings, refer to page 11.
-10-
1 2
MEMORY MARK