WIKA O-10 Mode D'emploi page 19

3. Specifications
3.14 Electrical connections model O-10 (T)
Available connections
Electrical connection
Angular connector DIN 175301-803 A
Angular connector DIN 175301-803 C
Circular connector M12 x 1 (4-pin)
1)
Metri-Pack series 150
2)
Cable outlet, unshielded
Cable outlet, shielded
1) for model O-10 (T) only possible from measuring range 0 ... 60 bar
2) up to a maximum of 80 °C permitted
The stated ingress protection (per IEC 60529) only applies when plugged in using mating connectors that have the
appropriate ingress protection.
Short-circuit resistance
S + vs. 0V
Reverse polarity protection
U B vs. 0V
Overvoltage protection
DC 36 V
Insulation voltage
DC 750 V
WIKA operating instructions pressure sensor, model O-10
Ingress Wire cross-
protection section
IP65 -
IP65 -
IP67 -
-
IP67
2
IP67 0.14 mm
2
IP67 0.14 mm
Cable Cable
diameter lengths
- -
- -
- -
- -
3.4 mm 2 m, 5 m
4.3 mm 2 m, 5 m
EN
19