Safety; Intended Use; General Safety Instructions - BRÖTJE KB3B SGB E Instructions De Montage

Safety

GB
2. Safety

2.1 Intended use

2.2 General safety instructions

14
Danger! It is very important that you observe the following safety instructions.
Otherwise you are endangering yourself and others.
Cascade kit KB3B SGB E is designed to route together the flow and return connec-
tions from two EuroCondens SGB 400 E, SGB 470 E or SGB 540 E series gas con-
densing boilers with the same output.
Cascade kit KB4B SGB E is designed to route together the flow and return connec-
tions from two EuroCondens SGB 610 E series gas condensing boilers with the
same output.
Caution! When installing the accessories, there is a risk of significant injury and
material damage. Accessories must therefore only be installed by trained contrac-
tors and commissioned by a competent person appointed by the system installer.
Accessories used must comply with technical regulations and have been approved
by the manufacturer in connection with the accessories.
Only original spare parts may be used.
Unauthorised conversions and modifications to the accessories are not permitted,
as this can endanger persons and cause damage to the accessories. The accessory
approval will become void if these instructions are not observed.
Cascade kit SGB 400-610 E 7307462-01 02.13